XENO XDR960 User Manual - page 40
User’s Manual | 40
4.1.7 Face Stamp User Registration
Listed users can be monitored as Faces Stamp events through VMAX960H Series when listed users check in and out Face
Stamp.
To add, delete, or modifty Facestamp users, go to the DVR’s System Settings, Facestamp sub-menu.
1. Select the channel to which the Facestamp access panel is connected.
2. To add a user, press the add button.
3. Enter a USER ID. This will be the ID each user will have to enter in the Face Stamp Access Panel to identify themselves.
4. Enter USER NAME. This name will appear as the access panel recogn
izes the user’s ID when entered correctly.
5. To modify or delete a user, check the box next to the user’s name and press ‘modify’ to adjust the user’s name, or ‘delete’ to
remove the user all together.
4.1.8 Face Stamp Schedule
Go to the Schedule Setup menu to assign the Facestamp channel a recording schedule. After selecting the Face Stamp
channel, user schedule this with Face Stamp profile. See section 4.3 Record for more information on setting up a recording
schedule.