Xerox 4215 Operation Manual - page 14

INSTALLATION

5. Click on Fax Printer to change the printer driver to the

required printer.  Make sure your printer is selected in the

Select LaserWriter window.

6. Click on Continue if the system prompts you to select Page

Setup and confirm the settings.  This is necessary for the

application to format documents correctly for the fax printer.

7. In order to spool one or more faxes to the Print Monitor

queue and to continue working on your Macintosh computer

during fax transmission, the Background Printing should be

set to ON.  If Background Printing is set to OFF, you are not

able to delay fax transmissions (as explained in the

“Operation” chapter).

8. Verify that AppleTalk is active.

9. Close the Chooser window.

You do not have to restart your system.  Fax Printer is now

the default driver.  If other software on your system is

installed to use another driver (for example, LaserWriter),

select the appropriate driver (through the Chooser) to print

from those applications.

10. Click on Continue if the system prompts you to choose Page

Setup and confirm the settings.  This is necessary for the

application to format documents correctly for the fax printer.

11. Pull down the File menu from the desktop menu bar and

select Print Directory..., Print Desktop... or Print Window...,

in order to verify that you have successfully installed the fax

printer driver.  The Print Dialog window should include a

Destination field with three radio buttons:  [Printer], [Fax],

and [PostScript File].

12. Click on the Destination: [Fax] radio button.

The [Print] button in the top right corner of the window

changes to a [Fax] button.

N

Note:  Destination: [Printer] is always the default

setting.  If you do not see Destination options at the

base of the window, repeat the installation procedure.

At this point you may continue with “Initial configuration

options“ to set up the fax utility software for your environment,

or click on [Cancel] and perform the basic configuration later.

Initial configuration settings

Follow these steps to set up the fax utility software for your work

environment:

1. If the Print Dialog window is not currently open on your

desktop, select Print Directory..., Print Desktop..., or Print

Window... from the File menu.  Click on the Destination:

[Fax] radio button.

2. Click on the [Fax...] button in the upper right corner of the

Print Dialog window.

The Fax Destinations window displays.

1-4

XEROX MRP FAMILY FAX MODEM FOR MACINTOSH OPERATOR GUIDE