Xerox Color J75 Press User Manual - page 131
Remedy: Decrease [Scan Resolution] to [400d pi] or less, and rescan.
003-753
Cause: When scanning a mixed size document using the 2 sided simultaneous scan
feature with 300, 400, or 600 dpi, an error occurs.
Remedy: Decrease [Scan Resolution] to [200 dpi] or less, and rescan.
003-754
Cause: An error occurred in the document feeder.
Remedy: Reprocess the job.
003-755
Cause: An error occurred in the document feeder.
Remedy: Reprocess the job.
003-757
Cause: When scanning a mixed size document using the 2 sided simultaneous scan
feature with 400, or 600 dpi, an error occurs.
Remedy: Decrease [Scan Resolution] to [300 dpi] or less, and rescan.
003-760
Cause: An incompatible combination of features is specified in the document scan
conditions.
Remedy: Check the selected options.
003-761
Cause: The paper size of the tray selected for auto tray is different from the paper
size of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the [Paper Type Priority]
settings.
003-763
Cause: An error occurred when reading the Gradation Adjustment Chart.
Remedy: Place the Adjustment Chart properly on the document glass.
003-795
Cause: When enlarging/reducing a scanned document to the specified paper size, the
reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
• Manually enter a reduction/enlargement ratio
• Change the paper size.
005-274
Cause: An error occurred in the document feeder.
Remedy: Power-cycle the machine. Contact your Xerox Customer Support Center.
10-15
Xerox
®
Color J75 Press
User Guide
Problem solving