Xerox Color J75 Press User Manual - page 223
049-288
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Module and the HCS.
049-300
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Module and the HCS.
049-310
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Module and the HCS.
049-500
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Module and the HCS.
049-700
Cause: HCS communication or software fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Check the connection between the Interface Module and the HCS.
049-900
Cause: The HCS detects paper at the HCS top tray, HCS bypass, or at the HCS stacker
tray. However, no paper is present; HCS sensor fault
14-21
Xerox
®
Color J75 Press
User Guide
High Capacity Stacker (HCS)