Xerox Color J75 Press User Manual - page 29

b) If necessary, make the desired changes to paper curl and alignment adjustment.

Note

Refer to the System Administration Guide for detailed information on the paper

curl and alignment adjustment options.

c) Select Save until you are returned to the tray settings window.

8. Select Confirm to close the window.

9. For network print jobs, refer to your print server customer documentation for

instructions on loading tab stock into a tray.

Loading transparencies in trays 1, 2, and 3

1. Select the appropriate paper stock for your print job.

2. Pull out the tray slowly until it stops.

3. Fan the transparencies to stop them from sticking together before loading into the

tray.

4. Load transparencies on a small stack of the same size paper. Align the edge of the

transparencies with a removable stripe against the left edge of the tray, with the side

to be copied or printed on facing down.

Note

• Do not load more than 100 transparencies in a paper tray at one time.

• Transparencies can be loaded either long edge or short edge feed (portrait or

landscape).

5. Adjust the paper guides by pressing in the guide release and carefully moving the

Edge Guide until it lightly touches the edge of the material in the tray.

Do not load materials above the MAX line located on the rear Edge Guide.

6. Gently push in the tray until it comes to a stop.

If enabled by your System Administrator, the Paper Tray settings screen may be

displayed on the UI.

7. If changes have been made to the paper tray, select the Change Settings button;

otherwise, proceed to the next step.

a) Make the desired selections for Paper Type/Paper Weight, Paper Size, and Paper

Color.

b) If necessary, make the desired changes to paper curl and alignment adjustment.

4-3

Xerox

®

 Color J75 Press

User Guide

Paper and other media