Xerox Color J75 Press User Manual - page 144
116-780
Cause: There is a problem with the document attached to the received mail.
Remedy: Check the attached document.
123-400
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
124-709
Cause: The number of pages exceeds the number of pages that can be stapled.
Remedy: Decrease the number of pages, or cancel the stapling settings, then try to
print again.
127-210
Cause: A malfunction occurred in the machine.
Remedy: Power-cycle the machine. If the machine is not improved by performing the
relevant remedy, contact your Xerox Customer Support Center.
127-211
Cause: Detected a communication error between the printer and the controller.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem persists,
call the Customer Support Center.
127-212
Cause: Detected an internal print check error by the controller.
Remedy: Remove and reinsert the command/video cable between the controller and
the printer. Power off and on both the printer and the controller. If the problem persists,
call the Customer Support Center.
127-213
Cause: Detected a mismatch with the software version of the controller.
Remedy: Contact the Customer Support Center for information and/or instructions
to remedy the problem.
127-220
Cause: Detected a communication error of the video system by the controller.
Remedy: Remove and reinsert the cable connection between the printer and the
controller. Power off and on both the printer and the controller. If the problem persists,
call the Customer Support Center.
127-221
Cause: Detected a communication error by the controller.
Xerox
®
Color J75 Press
10-28
User Guide
Problem solving