Version 1.0 feb 8, 2010 secure installation and operation of your colorqube™ 9201/9202/9203.
Secure installation and operation of your colorqube™ 9201/9202/9203 purpose and audience thisdocument provides information on the secure installation and operation of a colorqube™ 9201/9202/9203 multifunction system. All customers, but particularly those concerned with secure installation and operat...
2 e). For customers concerned about document files on the hard disk drive(s) 3 or embedded fax card memory the immediate image overwrite and on demand image overwrite security features, which comes installed on the colorqube™ 9201/9202/9203 multifunction system, must be properly configured and enabl...
3 incomplete status information. The system administrator should immediately perform the requested on demand image overwrite. • the time shown on the on demand overwrite progress screen displayed on the local ui may not reflect daylight savings time. • if an on demand image overwrite is successfully...
4 • extraneous process termination events (event 50) may be recorded in the audit log when the device is rebooted or upon a power down / power up. L). Be careful not to create an ip filtering rule that rejects incoming tcp traffic from all addresses with source port set to 80; this will disable the ...
5 • select the [save] button. This will save the indicated local ui inactivity timer setting. After saving the changes the timers screen will be redisplayed. S). Change the administrator password as soon as possible. Reset the tools password periodically. Xerox recommends that you (1) set the admini...
6 12. If ipv6 is disabled and then a software upgrade is performed by a xerox service technician using an altboot, ipv6 will be disabled even though the both the local ui and web ui show that ipv6 is enabled. Ipv6 can be enabled again by first disabling it on the web ui and then re-enabling it on th...
7 (simultaneous jobs) pause window, scanning build job segment (no printing) pause window, printing build job segment (no scanning) pause window or scanning build job segment/printing another job pause window. • overwrite security failure – automatically provides an error message to the user is case...
8 menu. The system administrator can also set up advanced network controller sleep mode settings by selecting the [advanced settings] button located on the sleep mode settings page. • network logs – allows the system administrator to download a detailed log file that contains printer diagnostic info...
9 • workflow scanning display settings page – allows the system administrator to set up how the workflow scanning template list is displayed on the local ui. Is accessible by selecting the properties tab and then selecting from the properties tab content menu services Æ workflow scanning Æ display s...
10 • barcode space character interpretation - allows the system administrator to choose how the device renders space characters within barcode fonts. Is accessible by typing http://{ip address} 9 /diagnostics/barcodespacetoggle.Php. • dhcp v6 - allows the system administrator to choose which complia...
11 contact for additional information or clarification on any of the product information given here, contact xerox support. Disclaimer the information provided in this xerox product response is provided "as is" without warranty of any kind. Xerox corporation disclaims all warranties, either express ...
