Xerox DocuColor 7000 Operator's Manual - page 114

DocuColor 8000/7000 Operator Manual

3-40

3. Accessories

NOTE: To undock the HCSS from the digital press, reach into the 

circular area near the bottom of the HCSS for the Undocking 

Lever. Refer to the picture below. 

Pull the lever toward you and hold it in position while moving the 

HCSS a small distance (25.4mm, 1in.) away from the press. 

Release the lever and continue to move the HCSS as far as 

required.

Loss of Power

If power is interrupted to the HCSS80:

•

Ensure the power cord is plugged in to the proper wall 

receptacle.

•

Ensure that the digital press power is on.

•

If the power has not been restored by the above procedure, 

call Xerox Customer Support.

Also call your Xerox service representative if the loss of power to 

the HCSS80 seems to be frequent or excessive.

Undocking 

Lever inside 

here