Xerox DocuColor 7000 Operator's Manual - page 177
Other manuals for DocuColor 7000:
Use Manual, Planning Manual, Reference Manual, Getting Started, Brochure, Manual
Manual is about: Xerox Printer Operator Manual
of
194
DocuColor 8000/7000 Operator Manual
6-23
6. Maintenance
Adding Fuser Oil
A message appears on the UI advising you when to add Fuser Oil.
Use the following procedure to replenish the Fuser Oil supply.
1. Open the Right Front Door of the digital press.
2. Place a drop cloth on the floor under the Fuser area. Any oil
spilled on a hard floor will make the floor slippery.
3. Refer to the following figure for the location of the Fuser Oil
Reservoir Cap.
4. To open the Reservoir Cap, grasp the tab at the back of the
cap and pull it forward.
Fuser Oil Cap