Xerox DocuColor 7000 Operator's Manual - page 172

DocuColor 8000/7000 Operator Manual

6-18

6. Maintenance

a. Open each area and clean both surfaces of the transports.

b. Remove any residual moisture with a dry, lint-free cloth.

3. Go to the Xerox DocuColor 8000/7000 Product Support page 

at 

http://www.xerox.com

. At this web site, click on the 

Supports & Drivers

 link and nagivate to the desired product 

(either DocuColor 8000 or DocuColor 7000).

Scroll to the 

Issues and Solutions

 section and download the 

CMYK 

Halftone.pdf

 patterns for white spots.

4. Use the 70% halftone.pdf test patterns to run fifty prints (8.5 x 

11 inch/A4) of each color (C, Y, M, K).

a. Examine the prints for white spots.

b. Run fifty additional prints for each color still showing the 

defect.

c. Examine the last five prints for spots.

d. Run fifty additional prints for each color still showing the 

defect.

e. If the problem continues, contact your Xerox Service 

Representative.

5. If large amounts of paper dust are frequently observed, 

contact your Xerox Supplies Representative for an alternate 

paper recommendation.

NOTE: If Xerox analysis determines that persistent paper 

contamination is due to cut papers or the use of non-

recommended material, the customer may be liable for extended 

costs outside the scope of the service contract.