Xerox DocuColor 7000 Operator's Manual - page 96

DocuColor 8000/7000 Operator Manual

3-22

3. Accessories

Clear Top Tray and Stacker Tray paper jams

To clear the Top Tray, remove all paper from the Top Tray.

Perform the following steps to clear a jam from the Stacker Tray 

area and resume printing. 

1. Press the 

Unload 

button on the Stacker Control Panel. The 

Wait light blinks until the Stacker Tray has reached the down 

position.

2. Open the front door when the Unload Light illuminates.

3. Position the securing bar on top of the stacked paper.

4. Pull the Stacker Cart straight out.

5. Reach into the Stacker and remove any jammed paper.

6. Push the Stacker Cart straight into the HCS80.

7. Position the securing bar on the fixed area inside the HCS80.

NOTE: The front door will not close if the securing bar is not 

properly attached to the stacker frame.

8. Close the HCS80 front door.

9. Follow the instructions displayed on the digital press UI to 

resume printing.

Maintenance

Do not clean any area inside the HCS80. If the covers or Front 

Door require cleaning, dampen a paper towel or soft, clean cloth 

with a liquid, nonabrasive glass cleaner or water.

To avoid damage to the HCS80, do not pour or spray the cleaner 

or water directly onto the HCS80. Always apply the liquid to the 

cloth first.

Do not use any other cleaners or solvents on the HCS80 as they 

may interact with the paint on the covers, eventually causing the 

paint to peel.