Xerox DocuColor 7000AP User Manual - page 44
DocuColor 7000AP/8000AP User Guide
9-4
9. Maintenance
Cleaning the Paper Transport and Fusing areas
WARNING:
If the digital press is switched on and
the fuser is hot, switch off the digital press power
and allow the Fuser to cool for 15 minutes.
1.
Open the Front Doors and pull out the Paper
Transport Drawer using handle 4.
2.
Clean the chute area with a lint-free cloth that
was supplied with the digital press (Xerox
Part Number: 19K03610).
3.
Clean the Horizontal Transport Belts and the
surrounding area with a lint-free cloth that
was supplied with the digital press (Xerox
Part Number: 19K03610).
NOTE: Rotate the belts from left to right as you
continue to wipe them. Use the cloth to rotate them
as using your hands could leave grease or dirt and
create paper jams.
4.
Clean the sensors with a lint-free cloth that
was supplied with the digital press (Xerox
Part Number: 19K03610).
5.
Close the Paper Transport Drawer.