Xerox DocuColor 7000AP User Manual - page 80
DocuColor 7000AP/8000AP User Guide
12-4
12. Appendix
Audio Tones
There are three audio tones:
•
Attention:
The Attention Tone sounds six seconds after a
scan job has been completed to remind you to
remove the document from the Scanner glass.
•
Button Selection
:
A single tone indicates that the button you
pressed can be selected. A double tone
indicates that the button is not available.
•
Fault
:
The Fault Tone indicates that the digital press is
in a fault condition and does not operate until
the fault is cleared.
The Audio Tones can be deactivated or made
louder or softer through the Tools Mode.
For more information, refer to the System
Administration Guide.
Alert Screens
An
Alert
screen has a red bar across the screen
when a consumable product, such as Dry
Ink/Toner, needs to be replaced. An
Alert
screen
also indicates that the digital press is unable to
make prints because of a fault condition. Follow the
instructions on the UI to resolve the problem and
resume printing.