Xerox DocuColor 8000 Supplementary Manual - page 27
C
OLOR
W
ISE
P
RO
T
OOLS
27
T
O
ASSIGN
D
EVICE
L
INK
P
ROFILE
SETTINGS
1 After you download the Device Link Profile using Profile Manager and add it to the Device
Link Profile panel, select the source and output profiles for this Device Link Profile in the
Device Link Profile Settings dialog box.
If the Device Link Profile already has a source and output referenced, the Output and Source
Profiles automatically appear.
If the source or output profile referenced in the Device Link Profile is not found on the Fiery
EXP8000/50, the source profile shows “Unassigned” and a message appears, stating that the
source or output profile cannot be found.
Click Information for more detail about the missing profile.
If you install the source or output profile to the Fiery EXP8000/50 that matches the missing
profile referenced in the Device Link Profile, the “Unassigned” setting is automatically
updated.
N
OTE
:
If the source or output setting is unassigned, the Device Link Profile cannot be used.
You must assign settings.