Xerox DocuColor 8000 Supplementary Manual - page 35

C

ALIBRATION

35

With the Print Pages option, print Comparison Pages showing the results of the new 

measurements with any profile associated with the currently selected calibration set. You can 

create a custom Comparison Page and save it as a PostScript or Encapsulated PostScript (EPS) 

file called CALIB.PS. Print the file to the Hold queue of the Fiery EXP8000/50 from your 

application. You can also create a CALIB.PS file by renaming any job in the Hold queue using 

Command WorkStation (see 

Utilities

).

With the View Measurements option, you can view the current set of measurements as a table 

or graph that shows both the measurements and the target curves.

When more than one profile uses the same target, an additional menu called Plot Against 

appears in the upper-right corner of the dialog box. It lists all output profiles that use that 

same calibration set. Selecting an output profile from this menu displays the target curves 

associated with that profile. If each output profile contains a unique calibration target, the 

curves displayed also change when you switch profiles.

Applying measurements to multiple calibration sets

The Apply to all calibration sets option in Calibrator allows you to copy the measurements 

from the calibration you are currently performing to all calibrations sets on the server. This 

option is only available if the Fiery EXP8000/50 has more than one calibration set. It is 

selected by default.

1

Output profile name

1