Xerox IJP 2000 User Manual - page 103
of
146
Problem Solving
Xerox® Wide Format IJP 2000
User Guide
4-9
Error Messages
This section describes how to solve the problem when an error message appears.
Note
The message displayed may vary depending on each error.
Error Message
Cause
Remedy
A fault has occurred.
Switch the machine Off and
then On.
If the trouble persists, call
for service.
XXX-XXX
An internal error occurred.
Turn the power switch off. Be sure the
touch screen is turned off before you
switch the power back on. Turn the power
switch on again.
If the message persists, record the
displayed contents XXX-XXX.
Then, turn the power switch off, and after
the touch screen goes out, contact your
local Xerox representative.