Xerox IJP 2000 User Manual - page 130
System Administrator Menu Settings
Xerox® Wide Format IJP 2000
User Guide
5-20
IPv6 Address - Manual
Enter the IP address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx is a
hexadecimal value.
Notes
–
You can fill in this field only when IPv6 Address Manual Set is set to Enabled.
–
You must enter an IP address before you can select Save.
IPv6 Address Prefix
Set the IP address prefix in the range of 0 to 128.
The factory default is 64.
Note
This option is enabled only when IPv6 Address Manual Set is set to Enabled.
IPv6 Gateway - Manual
Enter the Gateway address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx is
a hexadecimal value.
Notes
–
This option is enabled only when IPv6 Address Manual Set is set to Enabled.
–
You must enter a gateway address before you can select Save.
IPv6 Address - Auto
This field displays the Link-local address, IPv6 address, and Gateway address that have been
automatically configured.
SSL / TLS Settings
1.
Press SSL / TLS Settings.
2.
Set each item as necessary, and click Close.