Xerox IJP 2000 User Manual - page 81
of
146
Daily Management and Maintenance
Xerox® Wide Format IJP 2000
User Guide
3-13
12. Return the lever back to its original position.
13. Close the print head cover.
14. Press Done.
Message Setting print head appears.
It takes approximately 10 minutes to set up the print head.
15. After the replacement of the print head has been completed, press Replaced.
Note
To continuously replace other print head, press Replace more, and repeat steps 2 to 13 to make
replacement.
After the replacement of print heads has been completed, proceed to
Carrying out Calibration
on
page 3-21.