Xerox Phaser 3052NI User Manual - page 27
CentreWare® Internet Services
Xerox® Phaser® 3052/3260
User Guide
19
Adjusting the Altitude
Print quality is affected by atmospheric pressure, which is determined by the height of the machine
above sea level. The following information will guide you on how to set your machine for the best print
quality.
Wi-Fi settings must be configured before you can set the altitude. Refer to
Easy Wireless Setup
.
Before you set the altitude value, determine the altitude where you are.
1.
Enter the IP Address of the printer in the browser.
2.
Select
Login
and enter the
ID
(admin) and
Password
(1111).
3.
Select
Properties
>
System
>
Setup
.
4.
Select an
Altitude Adjustment
value, based on your altitude in the table above.
5.
Select
Apply
.
Altitude
Value
0 - 1000 M
0 - 3,280 ft.
Normal
1000 - 2000 M
3,280 - 6,561 ft.
High 1
2000 - 3000 M
6,561 - 9,842 ft.
High 2
3000 - 4000 M
9,842 - 13,123 ft.
High 3
4000 - 5000 M
13,123 - 16,404 ft.
High 4