Xerox Phaser 3052NI User Manual - page 96
Machine Digital Certificate Management
Xerox
®
Phaser
®
3052/3260
User Guide
104
Create a Certificate Signing Request
1.
In the
Install/Create New Certificate
area select
Create Certificate Signing Request
.
2.
Select
Next
.
3.
In the Certificate Signing Request (CSR) area:
a.
Enter a
Friendly Name
to identify the request.
b.
In the
2 Letter Country Code
field enter the Country Code that represents the country in
which the machine is located. The country code must be entered as a two-character ISO 3166
country code.
c.
If required, enter details in the following fields:
•
State/Province Name
•
Locality Name
•
Organization Name
•
Organization Unit
Information entered for these options should describe the machine as per the X500 directory
scheme but can be any value which is meaningful to the customer to identify the machine.
Note:
The
Common Name
is taken from the machine’s IP Address/Host Name and Domain
Name.
d.
Enter the
E-mail Address
of the Administrator who is responsible for the secure management
of the machine.
4.
Click
Next
.
5.
In the Certificate Signing Request (CSR) area, click
Download
.
6.
Send the downloaded file to your Certificate Authority for digital signing.
7.
When you receive the signed certificate back from the Certificate Authority, follow the steps below
to
Install a CA Signed Device Certificate
.
Install a CA Signed Device Certificate
1.
In the
Install/Create New Certificate
area, select
Install CA Signed Device Certificate
.
2.
Select
Next
.
3.
In the
Certificate Information
area:
a.
Enter a
Friendly Name
to identify the certificate
b.
Enter the required
Private Password
and
Confirm Password.
c.
In the
CA Signed Certificate
area click
Browse
to find the certificate file on your computer.
Select the file.
d.
Click
Next
.
4.
Select the
Apply
button to accept the changes.
If prompted, enter the Administrator User Name (
admin
)
and Password (
1111
), and select
OK
.
5.
If successful, the
Current Status
area displays a confirmation message.
6.
Follow the steps in
Enable Secure Connection
.