Xerox Phaser 3052NI User Manual - page 44
Windows Drivers
Xerox® Phaser® 3052/3260
User Guide
36
If you use Windows Vista, select
Start
>
All Programs
>
Accessories
>
Run
, and type
X:\Setup.exe
.
If the AutoPlay window appears in Windows Vista, select
Run Setup.exe
in
Install or run program
field, and select
Continue
in the User Account Control window.
3.
Select
Install Software
. A Printer Connection Type window displays.
4.
Select
Wireless network connection
.
5.
When asked if you are setting up the printer for the first time, select
Yes, I will set up my printer’s
wireless network
and click
Next
.
6.
Select your wireless network from the list and click
Next
.
7.
If required, click
Advanced Settings
to set the following.
8.
Click
Next
. The Select Software to Install window displays.
9.
After the installation is finished, select
Print a test page
and select
Finish
.
If your printer is connected to the computer, a Test Print page will be printed. If the Test Print operation
is successful, refer to the Print chapter of this guide. If the print operation failed, refer to the
Troubleshooting chapter of this guide.