Xerox Phaser 3052NI User Manual - page 52
Sharing Your Machine Locally
Xerox® Phaser® 3052/3260
User Guide
44
Sharing Your Machine Locally
If a host computer is directly connected to the machine with a USB cable and is also connected to the
local network environment, the client computer connected to the local network can use the shared
machine through the host computer to print.
Follow the steps below to set up the computers to share your machine locally.
Windows
Host Computer Setup
1.
Install your printer driver. Refer to
Printer Drivers
.
2.
Depending on your operating system, navigate to the
Printers
,
Printers and Faxes
, or
Devices
and Printers
settings from the Windows
Start
Menu or through the control panel:
3.
Select your printer icon and select
Printer
Properties
.
Note:
If the
Printer properties
item has a
?
, you can select other printer drivers connected with
the selected printer.
4.
Select the
Sharing
tab.
5.
Check the
Change Sharing Options
check box.
6.
Check the
Share this printer
check box.
7.
Enter details in the
Share Name
field.
8.
Select
OK
or
Next
.
Client Computer Setup
1.
Install your printer driver. Refer to
Printer Drivers
.
2.
From the Windows
Start
menu, select
All programs
>
Accessories
>
Windows Explorer
.
3.
Enter the
IP address
of the host computer and press
Enter
.
4.
If the host computer requires a User name and Password, enter details in the
User ID
and
password
field of the host computer account.
5.
Select the printer icon you want to share and select
Connect
.
If a set up complete message appears, select
OK
.
6.
Open the file you want to print and start printing.