Xerox Phaser 3052NI User Manual - page 37
Network Installation: Linux
Xerox® Phaser® 3052/3260
User Guide
29
Dynamic Addressing
Procedure
Follow the steps in
Configure TCP/IP Settings Using CentreWare CentreWare Internet Services
, then
return to this page.
Important
: Highlight
BOOTP
in step 6.
Create the Print Queue
Follow the steps to
Create the Print Queue
.
Linux LPR via PrintTool
Static Addressing
Information Checklist
Before starting ensure that the following item is available and/or the task has been performed:
•
Linux operating system that supports PrintTool.
Procedure
Follow the steps in
Configure TCP/IP Settings using CentreWare CentreWare Internet Services
, then
return to this page.
Create the Print Queue
1.
Log in, at the Linux Client, as root in a terminal.
2.
Enter
printtool
.
3.
The Red Hat Linux Print System Manager will launch.
4.
Select
Add
.
5.
The Add a Printer Entry window displays.
6.
Select
Remote Unix (lpd) Queue
.
7.
Select
OK
.
8.
The Edit Remote Unix (lpd) Queue Entry window displays.
9.
Enter the name of your Print Queue in the Names area.
10. The Spool directory is the directory where print jobs are stored and is a subdirectory of
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
11. Ensure that the File Limit reads
0
.
12. In the Remote Host area, enter the IP Address of the Xerox machine.
13. In the Remote Queue area, enter the Print Queue Name from step 10.
14.
Do not
select the Input Filter option.
15. Leave the default
Suppress Headers
selected.