Xerox Phaser 3052NI User Manual - page 95
Machine Digital Certificate Management
Xerox
®
Phaser
®
3052/3260
User Guide
103
4.
If prompted, enter the Administrator User Name (
admin
)
and Password (
1111
), and select
Login
.
Select
Properties.
5.
In the
Security
link on the left hand side select the
Network Security
link.
6.
Select the
Digital Certificate
link. The
Certificate Management
page displays.
7.
Select
Add
.
Select one of the following options:
•
Install/Create Device Certificate or CSR. The following options are available:
•
Create a Self Signed Device Certificate
•
Install CA signed Device Certificate
•
Create Certificate Signing Request (CSR)
•
Install Root Certificate
Create a Self Signed Certificate
1.
In the
Install/Create New Certificate
area select
Create a Self Signed Device Certificate
.
2.
Select
Next
.
3.
In the
Self Signed Certificate
area:
a.
Enter a
Friendly Name
.
b.
In the
2 Letter Country Code
field enter the Country Code that represents the country in
which the machine is located. The country code must be entered as a two-character ISO 3166
country code.
c.
If required, enter details in the following fields:
•
State/Province Name
•
Locality Name
•
Organization Name
•
Organization Unit
Information entered for these options should describe the machine as per the X500 directory
scheme but can be any value which is meaningful to the customer to identify the machine.
Note:
The
Common Name
is taken from the machine’s IP Address/Host Name and Domain
Name.
d.
In the
Valid Period
box, enter the number of days that the certificate should be valid. Once
the specified time is reached, the certificate will expire. The start time is based on the current
machine system time so it is important that the time is set correctly on the machine.
e.
Enter the
E-mail Address
of the Administrator who is responsible for the secure management
of the machine.
4.
Select the
Next
button. A message displays to show the success of the certificate creation.
5.
Click the
Close
button. The certificate displays in the
Certificate Management
area.
6.
Follow the steps in
Enable Secure Connection
.