Xerox Versant 80 Press System Administration Manual - page 22
2. Press the Machine Status button on the press User Interface.
3. Under Device Information, select Maintenance Assistant.
4. Select Send SMart eSolutions Data to Xerox.
The press begins to push diagnostic data to Xerox Support and prints a sheet stating
Success or Failed.
Updating the Proxy Server through CentreWare Internet Services
Updating the Proxy Server
If prompted, type in the user ID name and the password. The defaults are admin and
1111.
1. In CentreWare Internet Services, select Properties > Smart eSolutions > Proxy
Server .
2. Under General, next to Use Proxy Server, select Enabled.
3. Next to Proxy Setup, select Same Proxy for All Protocols to use the same proxy
settings for both HTTP and HTTPS. To enter different HTTP and HTTPS values, select
Different Proxy for each Protocol.
4. Under HTTP Server, perform the following steps:
a) Type the Server Name.
b) Type the Port Number. The default port number is 8080.
c) If your network administrator concurs that the proxy server is configured to require
authentication, next to Authentication, select Enabled.
d) Type the Login Name and Password. Retype the password to confirm.
5. Under HTTPS Server, type the HTTPS proxy server information, if you selected
Different Proxy for each Protocol for Proxy Setup.
a) Type the Server Name.
b) Type the Port Number. The default port number is 8080.
c) Next to Authentication, select Enabled if your proxy server is configured to require
authentication.
d) Type the Login Name and Password. Retype the password to confirm.
6. Click Apply.
7. From the Status tab, under General, scroll down to locate and select Reboot Machine.
Xerox
®
Versant
®
80 Press
2-4
System Administration Guide
Xerox Remote Print Services