Xerox Versant 80 Press System Administration Manual - page 72
• Uncollated - Default Separator Tray
• Output Destination
• Face Up/Down Option
• Sample Job
• Annotations: Stored Comment, Comment on Side 1 and Side 2, Comment - Font Size,
Comment - Font Color
• Date: Position on Side 1 and Side 2, Font Size
• Page Numbers: Style, Position on Side 1 and Side 2, Font Size
• Bates Stamp: Number of Digits, Position on Side 1 and Side 2, Font Size
• Tab Shift Margin - Shift Value
• Booklet Creation - Default Cover Tray
• Covers - Default Front Cover Tray, Default Back Cover Tray
• Separators - Default Separator Tray
Setting the Copy Defaults
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Copy Service Settings .
5. Select Copy Defaults.
6. Select the item to be set.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Copy Control
Copy Control Overview
The options here allow you to select the default settings that relate to the copy operation,
including the following:
Xerox
®
Versant
®
80 Press
4-42
System Administration Guide
System Settings (Tools Administrator Mode)