Xerox Versant 80 Press System Administration Manual - page 66
Encryption Key for Confidential Data
This optional feature sets an encryption key to encrypt confidential information such
as the passcode of the system administrator. Encrypting confidential information
prevents a network hacking and an unauthorized access to the information. Enter an
encryption key of 4 to 12 characters using alphanumeric characters.
Important
If you change the existing encryption key, you may not restore confidential information
from a backup. The factory default encryption key is x-admin.
Note
This is an optional feature that may not be available on your machine; it is part of the
optional Data Security Kit. For more information, contact the Customer Support Center.
Furthermore, a service representative can block changes to the settings of this feature.
Refer to
Setting the Encryption Key for Confidential Data
.
Service Representative Restricted Operation
Select whether or not to restrict the operation by the service representative in order to
protect the security settings from being altered by someone impersonating the service
representative; options include the following:
• Off: The service representative is not restricted from any operations on the machine.
• On: The service representative cannot change the following settings: Delete All Data,
Secure Watermark, Data Encryption, Encryption Key for Confidential Data, Service
Representative Restricted Operation, System Administrator Settings, Maximum Login
Attempts by System Administrator, Overwrite Hard Disk, and Creating/Changing
Users with System Administrator Rights.
When On is set, set a maintenance passcode of 4 to 12 digits in the Maintenance
Passcode screen. Entering the passcode is required when the service representative
performs maintenance.
Important
When On is set and if you lose the system administrator’s user ID and passcode, the
items restricted to the service representative cannot be changed or reset to their default
values.
Software Download
This feature is not supported; however, it may still be accessible. This feature is only
for service representative use. Contact the Customer Support Center.Select Disabled
as the default setting.
Xerox
®
Versant
®
80 Press
4-36
System Administration Guide
System Settings (Tools Administrator Mode)