Xerox WorkCentre 3025BI User Manual - page 162
Security at Xerox
Xerox
®
WorkCentre
®
3025
User Guide
152
Security at Xerox
For the latest information on securely installing, setting up and operating your machine see the Xerox
Security Information Web site located at
www.xerox.com/security
.
Security Settings
To prevent unauthorized changes to printer settings, ensure a login ID and password is entered in the
System Administrator area.
Administrator Accounts
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the Administrator User Name (admin)and Password(1111), and select Login.
Click Properties.
5.
In the Security link on the left hand side, select the System Security link.
6.
Select System Administrator.
7.
If required, enter Administrator details for:
•
Name
•
Phone Number
•
Location
•
E-mail Address
8.
The WebUI Access Control check box controls access to the Internet Services screen.
9.
To change the Administrator Password, select the Change Password check box and enter the
required Login ID and password. The defaults are admin and 1111 respectively.
10. Select the Advanced button for Advanced Access Control.
11. Select Protect Login IPv4 Address if required, and enter the required login IP address that you
want to protect in the IPv4 Address box.
12. Select the required option for Login Failure Policy. The options are: Off, 3 times and 5 times.
13. Select the required number of minutes from the Auto Logout menu.
14. Select Security Settings Reset to enable this option if required.
15. Select Save.
16. To control access to the machine control panel, select the Enable check box to enable LUI Access
Control.
17. Select Apply to save the changes.
18. Select OK when the acknowledgement message displays.