Xerox WorkCentre 3025BI User Manual - page 31
Feature Defaults
Xerox® WorkCentre® 3025
User Guide
21
Feature Defaults
Your machine provides default settings for Copy and Fax so that you can quickly and easily make
selections for your job. The default selections can be changed by selecting the Machine Status button
on the control panel and the down arrows to select Feature Defaults. A password may be required to
access and change the System Setup settings.
Note:
Some options may be unavailable depending on your machine configuration.
Copy Defaults
The default selections for the Copy options can be set to those most frequently used. When you copy a
document, the default settings are used unless they have been changed for the current job. Once the
current job is complete the settings return to the default settings. A password may be required to
access and change the default settings.
Copy defaults you can set include:
•
Original Size
•
Reduce/Enlarge
•
Lighten/Darken
•
Original Type
•
Collation
•
Layout
•
Adjust Background
Fax Defaults (WorkCentre 3025NI only)
Your machine provides you with various user-selectable options for setting up the fax system. You can
change the default settings for your preferences and needs. Receiving and Sending settings can be
customized. A password may be required to access and change the Fax Setup settings.
Fax defaults you can set include:
•
Lighten/Darken
•
Resolution
•
Original Size
•
Multi Send
•
Delay Send
•
Priority Send
•
Send Forward
•
Receive Forward
•
Secure Receive
•
Add Page
•
Cancel Job