Xerox WorkCentre M24 Color Quick Start Manual

Page of 4

Download

Bookmark us

Fig. 1

Obtain IP address of the WorkCentre M24 from the machine settings

list or network administrator. Run your Internet browser and enter IP

address in the address field. You will see the Home page like the one

above. Click

Properties

Auditron Settings for Print - 1 of 4

Fig. 2

Click

Print Auditron

then check mark

Enable

and click

Apply New

Settings

Note: In an environment that includes Mac's, enable, next to "Non-

Account" Print must be checked in order for the Mac users to be able to

print.

Fig. 6

Click

Print Auditron

on the left to refresh the web page.

Fig. 3

Enter the User Name and Password. Click

. (See Machine

Administration User Guide for default password)

Fig. 5

Click

(The WorkCentre M24 will take approximately 5 minutes to

reboot.)

Fig. 4

The "Settings have been changed" confirmation screen appears. Click

Reboot

Page 1
Fig. 1 obtain ip address of the workcentre m24 from the machine settings list or network administrator. Run your internet browser and enter ip address in the address field. You will see the home page like the one above. Click properties . Auditron settings for print - 1 of 4 fig. 2 click print audit...
Page 2
Auditron settings for print - 2 of 4 fig. 7 enter an unused auditron account number, then click edit . Fig. 8 enter a user name (1 to 31 characters) that is not currently in use. Enter a password (must be 4 to 12 numeric digits only) that is not cur- rently in use. Click apply new settings . Fig. 9 ...
Page 4
Auditron settings for print - 4 of 4 fig. 7 click configuration tab. Fig. 8 from the features list, highlight specify job owner . In the specify job owner pull-down menu, select enter owner name . Enter the user name and password for the job owner previously configured on the internet services scree...