Xerox Xerox 4112 User Manual - page 265
Machine Status
Xerox 4112/4127 Copier/Printer
10-19
User Guide
HP-GL/2 - Default Programming
The default settings for your copier/printer can be either the factory default settings or you can
specify custom default settings.
1.
Select Default Programming.
2.
Select Factory Defaults to use the factory default settingsor select Custom Settings.
3.
If you select Custom Settings, select a memory number to specify which saved settings
should be used.
4.
Select Save.
The PDF option allows you to set a password and parameter values for PDF direct printing. This
feature is only available with the PostScript driver.
Password
1.
Select Password to access the Keyboard screen.
2.
Enter the password (up to 32 characters) and select Save.
Programming
1.
Select PDF on the Print Mode screen.
2.
Select Programming.
3.
Enter the 3-digit item number in the Item Number field. Refer to the following table for
parameters, item numbers, and values.
4.
Select Change Value.
5.
Enter the required value in the New Value field.