Xexun TK-102 User Manual - page 8
5.8 Auto Track
Report a Geo-info at 30s intervals to the authorized numbers for 5 times:
5.8.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s
intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at
maximum 255 in value.
5.8.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times
5.8.3 Cancel: Send notn+password to delete the “ auto track ”
Remark: the interval must not be less than 20s.
5.9 Voice Surveillance
In this mode, the user can dial up the unit to monitor the voice (please refer to 5.10 for
instruction).
5.10 Modes switch between “track” and “monitor”
5.10.1.
The default mode is “track”.
5.10.2.
Send SMS monitor+password to the unit, and it will reply “monitor ok!” and switch to
“monitor”mode.
5.10.3.
Send SMS tracker+password to the unit, it will reply “tracker ok!” and restore to “track”
mode.
5.11 Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to the authorized numbers when it breaches the district.
5.11.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send
SMS stockade+password+space+latitude,longitude; latitude,longitude to unit to set the
8