Xpr EX9 Manual - page 3
of
8
EX9 Wireless Radio Keypad User Manual v1.3
3
DIP SWITCH 2
On: Buzzer ENABLED
Off: Buzzer DISABLED
DIP SWITCH 1
On: backlighting ENABLED
Off: backlighting DISABLED
Power Supply if battery
is not used 12/24VAC/DC
1 - 2
RELAY 1 (NO)
3 - 4
RELAY 2 (NO)
5 - 6
POWER SUPPLY
12/24Vac/dc
7
ANTENNA GROUND
8
ANTENNA
Jumper B for relay 2
Jumper A for relay 1
LED 2 for relay 1
LED 3 for relay 2
3) MOUNTING
4) TERMINAL BLOCKS AND JUMPER SETTINGS
EX9-43B:
On the back side of the card there is a DIP-SWITCH that allows enabling/disabling the buzzer and the
backlighting of the keypad.
RX2:
Power Supply:
Jumper C closed: 12V AC/DC
Jumper C open: 24V AC/DC
3 (8x30 CSK)
2 (M3x6mm) security screws