Xpr EX9 Manual - Step 2)
EX9 Wireless Radio Keypad User Manual v1.3
4
STEP 2)
Send the User into RX2 Reciever
STEP 1)
Add New User in EX9-43B
STEP 3)
Send TX2A Code into RX2 reciever
5) PROGRAMMING
Entering the programming menu is done by the Master Code which is written on the
Sticker on back of the Keypad.
.
NOTE: The keypad automatically associates the transmission channel 1 to every new user
CODE + A + 1
Press the Tact Switch
ones for Relay1 (LED
1 & 2 ON)
Enter the User code
Press the Tact Switch
twice for Relay2 (LED
2 & 3 ON)
Press A
Enter the User
channel (1 – default)
LED 2 or 3 blinks 3
times
Press the Tact Switch
ones for Relay1 (LED
1 & 2 ON)
Press TX2A Button
Press the Tact Switch
twice for Relay2 (LED
2 & 3 ON)
LED 2 or 3 blinks 3
times
Enter the master code
Press B
Press 0
Enter the memory location of the
user to be memorized 01 to 99
Enter the new code (1-8 digits)
of the User
Press A
Press B to exit
Try the Code, press XXXX+A+1
Green LED will blink indicating
that the transmission is in
progress