Xpr EX9 Manual - page 7
EX9 Wireless Radio Keypad User Manual v1.3
7
7) RELAY SETTINGS
MODE 1: IMMEDIATE - The
relay remains active until the
radio signal persists
MODE 2: ON/OFF (Latch) - the
relay remains active until a
subsequent command is given or
when the transmitter button is
pressed once again
MODE 3: ON TIME - the relay,
once activated, remains active for
a programmable time of 3
seconds up to 18 hours
Jumper A OPEN for Relay 1
Jumper B OPEN for Relay 2
Jumper A CLOSED for Relay 1
Jumper B CLOSED for Relay 2
Jumper A OPEN for Relay 1
Jumper B OPEN for Relay 2
For Relay 1:
Press and hold
the Tact Switch
for 3 sec. Until
LED 1 is ON,
LED 2 blinking
For Relay 2:
Press and hold
the Tact Switch
for 3 sec. Until
LED 1 is ON,
LED 3 blinking
Press the Tact Switch ones again to
select MODE 3 (SLOW Blinking)
For Relay 1:
Press and hold
the Tact Switch
for 3 sec. Until
LED 1 is ON,
LED 2 blinking
For Relay 2:
Press and hold
the Tact Switch
for 3 sec. Until
LED 1 is ON,
LED 3 blinking
Press the Tact Switch ones again to
select MODE 1 (FAST Blinking)
Wait until the LED’s go OFF
Click for
beggining of
count and the
LED will start to
blink with 1
blink per
second. Count
the seconds to
which the relay
will be set.
Take TX2A
which opens
that relay
Click for end of
count.
Done.
The difference
between the 2
clicks is the
relay open time
Enter the User
Code that
opens that
Relay
Take EX9-43B
Keypad
Press A
Done.
The difference
between
pressing 1 and
again 1 is the
relay open time
Press 1 for
beggining of
count and the
LED will blink
with 1 blink per
second. Count
the seconds to
which the relay
will be set.
Press 1 for end
of count.