Yale YDM4109 User Manual - page 13
Direction
24 / 25
Settings
Voice / Melody Feature
You may select the operation sound that is set off when a door is open and closed.
➞
➞
➞
➞
To Set Voice/Melody Feature
》
Language Setting
English and Chinese languages are supported.
➞
➞
➞
➞
To Set Language
》
- It is advised to keep the fingerprint exclusive number(2 digits) as a separate list just in case for a separate
fingerprint deletion at Safety Mode.
Note
Forced Lock
➞
Outside Forced Lock Setting - Fingerprint
》
(5 sec)
➞
➞
Outside Forced Lock Setting - PIN Code
》
Inside Forced Lock Setting
》
- If you try to open a door with the handle or the Manual Open/Close Device from inside when
the Outside Forced Lock is set, the alarm goes off.
- If the Inside Forced Lock is set, any attempt to open a door from outside whether it’s be a fingerprint or
a PIN Code won’t work.
- When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and
the numbers will flicker from left to right one by one and repeat twice.
Note
(5 sec)
To set / Release Inside Forced Lock Switch
When the door is closed, move the Inside
Forced Lock Switch to LOCK position so
that a red sticker can be seen.
ⓐ Enter the registered fingerprint on the fingerprint sensor when the operation lamp(LED) is on.
ⓑ Press the [ ] button for 5 seconds. (A beeping sound sets off for 3 times.)
ⓒ Touch the keypad of the front body gently with your palm.
Description
ⓑ
ⓐ
ⓒ
(5 sec)
➞
➞
or