Yale YDM4109 User Manual - page 7
Change Mode
Normal Mode Safety Mode
Getting Started
- Make sure to leave the door open when registering a PIN Code because you may accidentally lock
a door while trying to register or change a PIN Code the first time.
- The previously registered PIN Code will automatically be deleted when the new PIN Code is registered.
- When registering a PIN Code, the registered PIN Code will be displayed on the keypad (Smart Pad)
in sequential order and, then, be disappeared.
- The Master Number is required to register or remove a fingerprint.
Note
12 / 13
How to Use
To Use Master PIN Code
(PIN Codes should be selected from 6 to 12 digits. [
*] and [#] are not allowed.)
To Register Master PIN Code (Normal Mode)
》
To Open Door with PIN Code
》
ⓑ
ⓐ
ⓒ
➞
ⓐ Open the battery cover in the back body and press (Registration) button once.
ⓑ Press the registered Master Number (6 to 12 digits) according to the voice guide.
(The default Master Number is ‘1 2 3 4 5 6 7 8 9 0’)
ⓒ Press the (Registration) button in the Back Body again to complete
the Master PIN Code registration.
ⓓ Touch the keypad of the Front Body gently with your palm.
Description
➞
Safety Mode Normal Mode
➞
(NEW)
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
Make sure to examine if the door opens normally with the
registered password or fingerprint after the registration is
complete.
Check if a door opens!
Normal Mode
The default setting is Normal Mode.
Safety Mode can be used for professional and high secure
management.
It enables you to make separate registration, and open a door
through the registered fingerprint or PIN Code.
➞
➞
ⓓ
➞
➞