Yale YDM4109 User Manual - page 15
1⃞
Remove batteries
Open the battery cover
in the back body
and remove
all batteries.
2⃞
Install Remote Control Module
Equip the Remote control
Module to the connector.
3⃞
Insert batteries
Insert all the batteries by
checking the [ , ]
connector.
4⃞
Confirm the installation
If you hear a ‘ting-a-ling’
sound, the Remote control
Module has been installed
correctly. Close the battery
cover.
⊕ ⊖
Ting-a-ling
Extra Features
28 / 29
Option
Buy the Remote control Module and
install it to link the remote control.
Remote Control Module
Remote control Module
》
Install Remote Control Module
》
Remote Control
To Release Remote Control
》
Not only FSK method but also the wireless encryption algorithm has been applied.
➞
➞
➞
➞
➞
ⓐ
➞
➞
➞
➞
To Register Remote Control
》
ⓐ Press the SET button of the remote control (Up to 5 Remote controls)
Description
- The wireless encryption algorithm resorts to the floating ID technology where the wireless
PIN Code is changed every time the remote control is operated.
Note
- The operation status may only be examined through the remote control.
Note