Yale YDM4109 User Manual - page 9
Change Mode
Normal Mode Safety Mode
Getting Started
- Make sure to leave the door open when registering a PIN Code because you may accidentally lock
a door while trying to register or change a PIN Code the first time.
- The previously registered PIN Code will automatically be deleted when the new PIN Code is registered.
- When registering a PIN Code, the registered PIN Code will be displayed on the keypad (Smart Pad)
in sequential order and, then, be disappeared.
- The Master PIN Code is required to register or remove a fingerprint.
- If you forget the PIN Code, you may not register or remove a fingerprint.
- It is advised to register the PIN Code with the same one as a PIN Code in case you lose it.
Note
- When already Normal Mode, this process doesn’t work.
Current Master PIN Code is changed to User PIN Code after changing mode. )
- kind of PIN Codes have to be different.
(There is an error if you try to register same PIN Code)
- One time user PIN Cod is only used for one time.
Caution
16 / 17
How to Use
To Use PIN Code
(PIN Codes should be selected from 6 to 12 digits. [
*] and [#] are not allowed.)
ⓐ
ⓒ
ⓐ Open the battery cover in the back body and press (Registration) button once.
ⓑ Press the registered Master Number (6 to 12 digits) according to the voice guide.
ⓒ Press the (Registration) button in the Back Body again to complete
the Master PIN Code registration.
Description
➞
Safety Mode Normal Mode
➞
(NEW)
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
Make sure to examine if the door opens normally with the
registered password or fingerprint after the registration is
complete.
Check if a door opens!
Safety Mode
The default setting is Normal Mode.
Safety Mode can be used for professional and high secure
management.
It enables you to make separate registration, and open a door
through the registered fingerprint or PIN Code.
➞
➞
➞
➞
➞
(NEW)
ⓑ
Change Master PIN Code
》
Change User PIN Code
》
➞
➞
➞
➞
➞
One Time User PIN Code
》
➞
or
➞
➞
or
➞
➞
➞
To Open Door with PIN s Code
》
➞
➞
➞
➞
➞
➞