Yamaha 02R96 Version 2 Supplementary Manual
02R96 V2.2 Supplementary Manual
The 02R96 System Software Version 2.20 features the following changes and additions (including the changes made
up to Version 2.11).
Changes and additions in Version 2.20
❏
More Add-On Effects Packages available (pages 155 and 158)
The following Add-On Effects Packages are now available:
•
AE041
Surround Post Package
•
AE051
Vintage Stomp Package
Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects pro-
grams. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have
Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library
have been dedicated to the new Add-On Effects Packages.
Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:
http://www.yamahaproaudio.com
❏
Additional trigger sources in the GPI OUTPUT section (pages 225 and 254)
The following parameters have been added as the trigger signal source in the GPI OUTPUT section.
xxx ON TALLY:
The trigger signal is active only while the corresponding channel is turned ON.
The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on
page 254.
❏
About the 02R96 Editor version
If you use the 02R96 Editor (Studio Manager) to control the 02R96, update the 02R96 Editor to version 2.1.2 or
higher (Studio Manager version 2.1 or higher).
If your Studio Manager CD-ROM version is not X5401
B0
, download the latest version from the following Yamaha
website:
http://www.yamahaproaudio.com
No.
Preset name
Type
62
Room ER
ROOM ER
63
Auto Doppler
AUTO DOPPLER
64
Field Rotation
FLD ROTATION
65
Max100
MAX100
66
Vintage Phaser
VNTG PHASER
67
Dual Phaser
DUAL PHASER
#
Source
254
CH1 ON TALLY
:
309
CH56 ON TALLY
310
BUS1 ON TALLY
:
317
BUS8 ON TALLY
318
AUX1 ON TALLY
:
325
AUX8 ON TALLY
326
ST ON TALLY
EN