Yamaha CRW-F1DX Owner's Manual - page 30

Preparing the CRW-F1DX Drive (Macintosh – FireWire)

20

• In the case that other FireWire storage devices such as a hard drive or an MO 

drive are connected to the computer, “fw609e” and “sbp609e” are shown in the 

column when any device is recognized. To check that the CRW-F1DX drive is 

recognized properly, un-mount icons of those devices, and then remove those 

devices temporarily.

• If the “FireWire” item is not shown, the FireWire interface of the computer is 

not recognized by the Mac OS. Contact the manufacturer of the computer.

• If the “fw609e” and “sbp609e”(or “CRW-F1E” in some versions) are not 

shown even with the “FireWire” item shown, the CRW-F1DX drive is not 

recognized by the Mac OS. In such a case, contact the store of purchase or your 

nearest Yamaha dealer (listed at the back of this manual).

• The FireWire version in Mac OS that supports the CRW-F1DX drive is 2.0 or 

later.

• The extension files that support the CRW-F1DX drive are required to mount 

and read the disc even if the drive is recognized by Apple System Profiler. The 

extension files come with the CD writing software. For details, refer to the 

instruction for the CD writing software.

For Mac OS X

1

Select Go in the menu bar, then Applications, Utilities, Apple System 

Profiler, and Device and Volume tab.

Note