Yamaha CRW-F1DX Owner's Manual - page 59
49
●
Can data be read from other discs (audio CD, CD-ROM, etc.)?
If no data can be read from a specific disc, data may be written in a format that the
drive cannot recognize, or the disc itself may be damaged or deformed. Note that no
data can be read from blank discs, and the CRW-F1DX drive infrequently fail to
read data correctly from a disc even if the disc is compatible with the drive.
●
Are the extension files supporting the CRW-F1DX installed?
(For Mac OS 9.1 and 9.2)
If the extension files supporting the drive are not installed, the disc cannot be
mounted or read. The extension files come with the CD writing software.
●
Does the status LED of the CRW-F1DX drive light correctly when a disc is inserted?
When a disc is inserted, the status LED will blink blue for a moment and then light
blue. (P. 3)
If no data can be read from a specific disc, data may be written in a format that the
drive cannot recognize, or the disc may be damaged or deformed.
If the status LED does not light (stating that the drive cannot recognize the disc) no
matter what type of disc is inserted, contact the store of purchase or your nearest
Yamaha dealer (listed at the back of this manual).
9
The playback of an audio CD (CD-DA) is inaudible.
●
Check that the volume is not set to the minimum level.
●
Be sure that headphones or external speakers are properly connected to the CRW-
F1DX drive.
●
For Windows XP/Me, follow the steps if the playback audio from headphones
connected to the CRW-F1DX drive is inaudible.
If Windows Media Player 7.0 or later is used with Windows XP/Me, this problem
can happen since the digital playback option is activated by default setting.
For Windows XP
1
In the Device Manager dialog box (P. 33, 39), select YAMAHA CRW-F1DX
Properties and then Properties tab.
Continued on next page