Yamaha CRW-F1DX Owner's Manual - Clip.

Loading/Ejecting a Disc

44

Manually Ejecting a Disc

If the disc tray fails to open for some reason, such as a power failure, follow the 

steps below to remove the disc from the drive.

Frequent use of this operation may cause malfunction of the drive.

1

Prepare a thin pin-like object, such as a straightened paper 

clip.

Use an object less than 2 mm in diameter and more than 3 cm in length.

2

Turn off the CRW-F1DX drive.

3

Insert the thin pin-like object straight into the manual eject 

hole, and push it in.

When the disc tray opens, remove the disc.

4

Turn on the CRW-F1DX drive, and close the disc tray.

Note

Manual eject hole