Yamaha CRW-F1DX Owner's Manual - Troubleshooting

45

Troubleshooting

1

The CRW-F1DX drive is not turned on when the power switch is ON.

(The power LED does not light.)

●

Are the AC adapter and the power cable connected properly?

Turn off the power switch and check that the CRW-F1DX drive, the AC adapter, the 

power cable, and the AC outlet are connected properly. (P. 15, 16)

If not, connect them properly, and then turn on the CRW-F1DX drive.

If the CRW-F1DX is not turned on (the power LED does not light) even if they are 

connected properly, contact the store of purchase or your nearest Yamaha dealer 

(listed at the back of this manual).

For IEEE1394 connection

2

The operating system does not start up properly. 

●

Is the IEEE1394 interface card installed properly? (For Windows)

Refer to instruction for the IEEE1394 interface card.

3

The CRW-F1DX drive is not recognized by the operating system. 

(Refer to page 19 for Macintosh or page 33 for Windows to check 

recognition of the CRW-F1DX drive.)

●

Is the 1394/USB selector set to IEEE1394? 

Set the 1394/USB selector of the CRW-F1DX to IEEE1394. 

(P. 15 for Macintosh, P. 29 for Windows)

●

Is the CRW-F1DX drive connected properly to the computer with the IEEE1394 

cable?

Turn off the CRW-F1DX drive and the computer. Check that the IEEE1394 

cable is fully connected to the CRW-F1DX drive. 

(P. 16 for Macintosh, P. 30 for Windows)

Refer to the YAMAHA CD-R/RW Drive website for the latest support information, 

including the troubleshooting guide.

YAMAHA CD-R/RW Drive website

URL: http://www.yamaha.co.jp/english/product/computer/

Europe

URL: http://www.yamaha-it.de/

Continued on next page