Yamaha CRW-F1DX Owner's Manual - Loading/ejecting A Disc

43

Loading/Ejecting a Disc

Prior to the operation, check that the CRW-F1DX drive is turned on.

1

Open the disc tray by pressing the eject button.

2

Place the disc onto the disc tray properly with its label facing 

upward.

Or remove the disc from the disc tray carefully so not to damage it.

3

Close the disc tray by pressing the eject button or by gently 

pushing the disc tray into the drive.

• Place or remove the disc after the disc tray has fully opened. Do not push or pull 

the disc tray with applying excessive force to avoid damage to the drive or the 

disc.

• The disc tray does not open while the application software prohibits ejecting, 

including when the drive accesses the disc.

Note

Press the eject button

Place or remove the disc 

onto/from the disc tray