Yamaha F50D Servise Manual - page 345
Other manuals for F50D:
Owner's Manual
of
372
10-10
0
1
2
3
4
5
6
7
8
9
10
A
å
D model
∫
PTT model
ç
F50D
∂
FT50C
TIP:
9
Replace the anodes if excessively eroded.
In addition, check the ground lead.
9
If it is necessary to disassemble the out-
board motor to check an anode, refer to the
applicable disassembly procedure in this
manual.
Checking the battery
1.
Check the battery. See “Checking the
battery” (10-4).
Checking the cooling water passage
1.
Remove the cooling water inlet covers
1
and trim tab
2
.
2.
Check the cooling water inlet covers and
cooling water inlets. Clean if clogged.
3.
Install the cooling water inlet covers
1
and trim tab
2
, and then tighten the
screw
3
and bolt
4
to the specified
torque.
å
∫
ç
∂
Predelivery check / General periodic maintenance