Z-Wave RC-100 Operating Instructions Manual - Z-Wave Advanced Setup

29 

Z-Wave Advanced Setup 

Learning Mode 

(Replicating All Network and Device Information from a Primary 

Controller to your RC-100) 

Your RC-100 can:  

•  Copy the settings from another Z-Wave controller. 

•  Be included into existing Z-Wave network and act as a secondary 

remote controller or back to a new primary remote controller. 

•  Be excluded from the Z-Wave network. 

Step 

Setup Key 

LCD Indication 

1 

Place the two controllers 

close to each other. 

- 

2 

Press and hold ef keys 

simultaneously for 3 

seconds under the Home 

page. 

⇓ 

3 

Select “Advanced 

Setup＂and press 

key. 

4 

Select “Learning 

Mode＂and press 

key. 

Please make sure the 

primary controller is 

setup to send 

information. (Refer to 

Home 

Device > 

Scene

> 

Comfort

> 

OK to Enter 

Setup 

Add Device

> 

Delete Device 

> 

Add to Scene 

> 

OK to Enter 

Setup 

Advanced Setup 

> 

System Settings  

> 

About

> 

OK to Enter 

Advanced Setup 

Learning Mode  

Config. Assoc. 

>

Configuration > 

OK to Enter