Zanussi Electrolux Built-in oven Instruction Book - page 11
64
The Hinged Grill
Some models are fitted with a hinged grill
element, to enable you to clean the roof of
the oven easily.
Before proceeding ensure the
oven is cool and is isolated from
the electricity supply.
l
Undo the screws which hold the grill in
place (see Fig. 9). When doing this
operation for the first time, we
recommend using a screwdriver.
l
Then gently pull the grill downward to
allow access to the oven roof.
l
Clean the oven roof with a suitable
cleaner and wipe dry before replacing the
hinged grill element.
l
Gently push up the grill element into
place and firmly screw into place the
holding nuts.
Ensure the grill holding nuts are
firmly in place to avoid the grill
falling down when in use.
Fig. 9
Telescopic shelf supports
The telescopic shelf supports can be
removed for easy cleaning. Undo the fixing
nut then remove the shelf supports from both
the oven sides (Fig. 10). To clean the
telescopic shelf supports, soak in warm
soapy water and remove stubborn marks
with a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth. Please,
ensure the retaining nuts are secure when
refitting the shelf support.
When cleaning the shelf supports, take
care not to remove the lubricating
grease behind the telescopic runners.
This is meant to ensure their good
operation.
Fig. 10