Zanussi Electrolux Built-in oven Instruction Book - page 2
55
Oven door protection device
(stainless steel models)
All our appliances comply with the
European Safety Standards.
Nevertheless, in order to ensure the
highest safety level, and avoid little
children to be exposed to the heat
when the appliance is operated, it is
possible to fit a special protection device
to the oven door. This device can be
purchased in our Service Force Centres,
specifying the relevant code ( 3 5 7 9 1 )
and the Product No. shown on the
rating plate. Fitting instructions are
provided with the kit package.
Guide to Use the
instructions
Safety Instructions
Step by step instructions for an
operation
Hints and Tips
F
Once the oven has been installed:
a) set the thermostat knob to MAX (250);
b) switch the oven function control knob to
conventional cooking ( );
c) allow the oven to run empty for
approximately 45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may
be emitted. This is absolutely normal, and
is caused by residues of manufacturing.
Repeat this operation for the grill and fan
cooking function.
Once this operation is carried out, let the
oven cool down, then clean the oven cavity
with a soft cloth soaked in warm soapy
water.
Before cooking for the first time,
carefully wash the oven
accessories.
When the oven is first installed
F
MANUFACTURER:
ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
Fig. 1
To open the oven door, always
catch the handle in its central part
(Fig. 1).
- +
FO 2161