Zanussi Electrolux Built-in oven Instruction Book - page 5
67
How to select a
temperature
Every time you select a cooking function, a
pre-set temperature is displayed on the
control panel. You can adjust the temperature
value at any time of cooking.
Press button 5 or 6 to adjust the tempe-
rature.
You can also get the current internal
temperature by pressing button 4.
How to switch off the oven
It is possible to switch off the oven at any
time.
Press button 1 once. All pilot lights will
come off.
"Fast Heat Up" function
After a cooking function has been selected
and the temperature has been adjusted, the
cavity will gradually heat up until the selected
temperature is reached. This will take from
10 to 15 minutes, depending on selected
function and temperature.
If it is necessary to reach the required
temperature in a shorter time, the "Fast Heat
Up" Function can be used.
Switch the oven on by pressing button 1.
Set the required cooking function and tem-
perature as explained in the previous
pages.
Press button once. The tempera-
ture display will show "FHU".
When the required temperature is
reached, an acoustic alarm will sound for
a short time, and the temperature display
will revert to the set temperature.
This function can be used with any cooking
function or temperature.
Defrosting Function
It is possible for the oven fan to operate without
heat and circulate the air, at low temperature,
inside the oven. This increases the speed of
defrosting.
Switch the oven on by pressing button 1.
Press button twice. The tempera-
ture display will show "32". This tempera-
ture setting cannot be changed.
To switch the "defrost" function off, just
press button once again.
This function is particularly suitable for
defrosting delicate food which could be
damaged by heat, e.g. cream filled gateaux,
iced cakes, pastries, bread and other yeast
products.